Loading... Please wait...

3/4" Bowl Gouge "U" Shaped. 13" x .760 - With 5/8" Tang.

Hover over image to zoom

  • Image 1
  • Image 2
D-Way Tools

 Product Description

Our 3/4" Bowl Gouge has a "U" shaped flute.  An excellent gouge for roughing, and with the full radius flute - it makes a great shearing cut for finishing the inside and outside of bowls and platters.
3/4" Bowl Gouge "U" Shaped. 13" x .760--- With 5/8" Tang.

This is a bad as# wood eater.

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write Reviews Here

  1. Quickly became my go-to gouge

    Posted by Joe Cornell on Mar 31st 2022

    For many years, all my bowl gouges have had an irish grind so this gouge threw me a little when I first used it. Once I got used to using its more traditional grind, it became my favorite for roughing and even some initial shaping. I plan to keep the original profile. The steel cuts through the hard maple I use like it was butter and holds an edge as well as my ASP 2030 skews. Sharpening really is easier when you take off the handle. I strongly recommend watching the sharpening videos on D-Way's site.

  2. A real joy to use

    Posted by Sheila on Apr 9th 2021

    This upped my turning skill. Cuts through the hardest wood like nothing else. Can also make a clean finish needing very little sanding. Wow. It's beefy, holds an edge like no other. A great addition to my D-Way collection.

  3. Top quality 3/4 bowl gouge

    Posted by Dave on Mar 22nd 2021

    I got this 3/4 bowl gouge to hog off wood and that’s what it does. As with the other d-way gouges I own it holds an edge very well, and I was pleased to find out it fits in my vari grind 2 sharpening jig so I didn’t have to make my own or change my sharpening style. Over all a great tool to have in the arsenal.

  4. None better

    Posted by Fred Guendel on Dec 13th 2020

    As a general observation, you cannot buy a better turning tool than a D-WAY tool. This 5/8" "U"-shaped flute bottom bowl gouge demonstrates the point. Leaves an excellent cut finish on all parts of a bowl, especially the bottom and keeps its edge for a long time.

  5. Solid tool great steel

    Posted by armor4hm@comcast.net on Aug 18th 2018

    Great cutter with fantastic steel. Sharpens easy on the CBN and holds an edge.

  6. Experince with t.he 3/4" chisel

    Posted by Unknown on Jul 21st 2018

    first impression was WOW, does that chisel cut. And it does. Now that I have gain a little experience turning, this chisel really helps to take the work out of turning bowel blanks. Thanks Dave.

  7. An excellent product.

    Posted by David Adolph (Wildwood Design) on Nov 17th 2017

    This product works well. Good and heavy, very little vibration even on tough, gnarly,wood, and it holds an edge well, as I have come to expect of the fine tools D-Way has to offer.

    Would I buy D-Way tools again? You bet!

  8. All the tools I have purchased from D-Way have been fantastic.

    Posted by Dave S on Nov 13th 2017

    They all arrive in great condition I wish I could sharpen my tools to the same standard they arrive in. I guess I need to take a class or keep practising.
    Great Tools and service. I will be ordering again real soon

  9. My favorite roughing gouge on Earth

    Posted by Zach LaPerriere on Sep 12th 2017

    You can almost roll a marble down the flute of this gouge—it's that deep and wide.
    For it's size this gouge is also pretty dang good for finer cuts. I personally like a clean surface on my rougher bowls, so I really appreciate the fine cut that the polished flute can give.

  10. Amazing tool

    Posted by Luigi on Sep 11th 2017

    Very impressive tool! Very long sharp ... I use all af tools that Dave that have made..
    Also this is a must that all woodturners must have

You Recently Viewed...

What's News


PayPal Acceptance Mark


Copyright 2022 D-Way Tools. All Rights Reserved.

Click the button below to add the 3/4" Bowl Gouge "U" Shaped. 13" x .760 - With 5/8" Tang. to your wish list.