Premier Series Heavy Weight CBN Wheel 8" x 1 1/2" with 5/8" Arbor Hole

These PREMIER Series CBN Wheels are 8" x 1-1/2" x 5/8" Arbor Hole. 

Known as the "Heavy Weight" Wheel, these wheels require a 1 HP Grinder.

AVAILABLE in 120 grit; 220 grit; 400 grit. 

The NEXT GENERATION of CBN WHEELS!!  D-WAY TOOLS introduced the first CBN Wheels to the woodturning community at the 25th Annual AAW Symposium - now are very excited to share our latest sharpening innovation. We set the original standard of 80 grit & 180 grit for basic woodturning sharpening, however these wheels are so efficient that we have adjusted the recommendations to 120 grit for shaping and aggressive burrs & 220 grit for general sharpening on a wide variety of wood turning tools. The New Standard in CBN material and grit wear.

Premier Series Wheels have been recently developed and thoroughly tested in our production environment. We have found that the extra weight makes it run true and eliminates harmonic vibrations. Two Full Layers of a new and highly effective form of CBN material are applied and permanently bonded with a multi faceted electroplating process. The wheel edge features a 1/16" radius to facilitate over the edge grinding. On this heavy weight version, the CBN material also wraps down 1" on each side. All wheels are balanced with no need for bushings. Overall results are a smooth operating wheel with the highest CBN particle concentration possible. It will provide exceptional results in your sharpening and grinding activities. 

This CBN wheel runs and sharpens like no other on the market. The extra mass and weight grinds with authority and has been a game changer for our shop in shaping and finishing tools! ~ JIMMIE