Loading... Please wait...

1" Long & Strong Curved NEG Rake Scraper

Hover over image to zoom

  • 3/4" Long & Strong Curved NEG Rake Scraper
Boxmaster Tools
Due to popular demand - out of stock. Expected shipment date is 16 May.
Expected release date is on or before Jun 6th 2022

 Product Description

The name says it all...

This tool is a NEW LARGER SIZE: 1" X 7/16" X 10" long. 2" Tang fits all our handles with 5/8” receivers. 

This is a stout tool. It will hang over the tool rest with no chatter. Makes aggressive or fine finishing cuts with ease.

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write Reviews Here

  1. This truly a beautiful tool.

    Posted by Robert Schoenert on Jan 10th 2021

    If you can see quality and beauty, that's what you'll see when you pick up this scraper. I resisted "negative rake" scrapers for years, telling folks that I have been successful using a "positive rake" scraper and just raising the handle. This tool changed my whole philosophy on that subject. When I told the guys in the club that I purchased a "negative rake", they laughed because I now know what they know. I have no doubt that the rest of the D-Way line is the same same quality as this tool.

  2. The best made and at a competitive price. Outstanding tool and value.

    Posted by John Hammonds on Sep 16th 2020

    Can a scraper be a functional, well-engineered work of art? This one is. A bit "over the top" for a mere scraper? Perhaps. I use scrapers to clean up the inside of a bowl and to finish the bottom of end-turned vessels ( I don't do tiny openings). I needed a hefty scraper that wasn't too wide to get to the bottom of deeper vessels, especially when I couldn't get one of my rests in far enough. I have now used this scraper on vessels, scraping the end grain with full overhang of the tool and found it to be amazingly stable. Of course, I do stick it in a hefty OneWay handle and that helps, but the thickness of this scraper makes a huge difference. Beyond that, I've got scrapers in M2 and A10 from various makers and all of them came with sharp edged sides ... where the tool hits the rest. D-Way puts a nice radius on the corners of all their tools ... the only sharp edge is the cutting edge. Just beautiful. And all their tools come with a sharp cutting edge. I'm no expert sharpener and I have to work at it to get my D-Way tools as sharp as they came. In this case the burr that came on this tool cut nice shavings and lasted about twice as long as the ones I put on. As Dave says in one of his videos ... "It'll be sharp once anyway". I think he was talking to me.

  3. More that expected.

    Posted by Byrle Brunton on Jul 2nd 2020

    Talked with Jimmie prior to buying this tool. I thought there way no way it would perform as he indicated. It doesn't; it so unbelievably superior to how he indicated it would perform. This tool solves your transition zone problems. Have used it on bowls from three inches in diameter to eighteen inches in diameter without a sniff of a catch. Like the rest of their tools, sharpening is a snap.

You Recently Viewed...

What's News


PayPal Acceptance Mark


Copyright 2022 D-Way Tools. All Rights Reserved.

Click the button below to add the 1" Long & Strong Curved NEG Rake Scraper to your wish list.