3/4" x 9/32 x 9" - 1/2" Tang.
Fits all our Handles with 1/2" receiver. No Bushing required. 20* top angle and 70* bottom.
It may look intimidating, but with the negative rake - this will soon become one of your favorite tools. The weight & heft of this tool gives you ultimate control. The 3/4 inch is our small size tool. It is very versatile and is good for a wide variety of small to medium woodturning projects. Much more user friendly to use than a standard scraper, and hard to get a catch with.
This scraper is great for detail work and finishing the outside of bowls. Best tool out there for refining at outside curve.
Works for getting in close to chucks and performing detail work on your piece. We are sure you will find many uses for this tool.
Negative Rake scrapers are a must for finishing wood, turning plastic, acrylics, or dense hard woods.
Posted by Jim Hill on Jan 10th 2021
I used this tool with the thought, do I really need another tool? The answer was yes, there is a spot on the usable tool shelf for this pointed sheer scraper - it goes and does what no other will do.
Thank you and keep up the good work.
Posted by Unknown on Oct 8th 2020
I have only recently started working with negative rake scrapers, and I've come to really enjoy using them. I started with the large round nose, and then I got this spear point so that I could get into the tighter corners and also the straighter sections of my turnings. I will continue to add to my collection in time with some of the other options that D-way offers.
I have been experimenting with diamond honing and carbide burnishing a burr, but I have also had reasonable results straight off the 600 grit CBN wheel. I often just do a quick touch up on the CBN wheel when I am in the middle of turning, and then I do the diamond hone and carbide burnish before putting away the scrapers.
All prices are in USD