Set of 2 Beading Tools. These Wood Turning Beading Tools are used with the flute down - which lets them be used in a shear cutting manner. Sizes are bead size. Can be used on faceplate or spindle work.
-- Beading Tool Choices are 1/16", 3/32", 1/8", 3/16", 1/4", 3/8" & Diamond Tool.
-- Recommend the 8" handles with 1/2" receiver, 1/2" to 3/8" bushings, & quick change knobs for all of our beading tools and Diamond tool.
Note: Light touch is all that is needed; longer handles interfere with the bed of lathe.
_______________________________________________D-Way Beading Tool Shaft Sizes (shaft diameter in inches):
Related Videos Below
Showing reviews 1-10 of 37 | Next
Posted by Albert on May 26th 2019
I purchased two beading tools and with little practice I find them to an excellent tool giving clean cuts and easy to use. I will be using D-Way tools again.
Enjoyed the videos Dave.
Posted by Steve on May 3rd 2019
Nice high quality tools. Have only had the chance to use them on one project but they have worked great and are still holding the original edge.
Posted by Doug Schneiter on Mar 13th 2019
I have been using the D-Way beading tools for several years, and find that with proper technique, they can form great beads in many different types of wood. I recommend these tools when I am doing demos and workshops, for my students who want to use the best tool for the job.
Posted by John Rander on Feb 27th 2019
I purchased the 1/8” and 3/16” beading tools. These work well right from the start, with a very short learning curve (after watching Dave’s video). They produce perfectly uniform beads. Even my practice pieces look great. Purchased these based on forum discussions and basket illusion videos. I’m very pleased with this purchase. The tools arrived razor sharp here in France in less than ten calendar days. Thanks Dave!
Posted by John D from NH on Jan 20th 2019
Just purchased the last two to complete the set. Matched up with the 8" handles these are the very best beading tools available. With proper care they will last a lifetime. Highly recommend to anyone that wants the best.
Posted by Ron Ashford Dannevirke, New Zealand on Aug 30th 2018
I saw some very interesting beadwork done by experienced turners and wanted to have a go. I friend here in New Zealand told me about D-Way Tools and after comparing them to other brands, I decided to give them a go. The quality of the metal and machining is superb. You are best to carefully watch all of Dave's videos as these tools are used in a unique way. They need to be very sharp, used with the tool rest raised about 3/4" and cut with very light pressure. Basically they are "shaped scrappers". Layout of the beads is effortless. The Diamond tool is great for bead detail and other similar work. This review applies for the tools I bought: 1/2, 3/8, 3/16 and Diamond point.
Posted by James on Aug 16th 2018
These tools work very well. I was surprised at how smooth a surface they left even on some figured maple.
Posted by Mark A. Zellner on Jul 27th 2018
Over the last couple of years I’ve picked up a few DWay beading tools at a time. I am so happy with how well they work that I’m always reaching for them. It seems I was looking for the size I didn’t have though. Received the last two earlier this week and have already used them on the base of red mulberry salad bowl. They’re sharp, creates consistent size beads and encourages confident creativity Thanks Dave for the fast service and quality tools.
Posted by Tom on Jun 25th 2018
I ordered 2 of D-Way's beading tools and was so impressed with them and the possibilities they create I just ordered 2 more different sizes. The quality and craftsmanship are excellent. I don't know what else I could add other than I gave them a 5 star rating, something I very rarely do as I feel it is hard for anything to be that good but these are a close as it gets!
Posted by Dave on May 21st 2018
I'm a novice turner but even I was able to turn perfect beads after only a couple of practice tries.
Showing reviews 1-10 of 37 | Next
All prices are in USD